Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools/Maintenance

$9.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. - Tire studs sold separately - POM-injected handle - Stainless steel barrel - Thumb and index finger grips for more comfort and control - Compatible with studs that have a 3.5mm or smaller shaft
$4.00
Brake pad spreader tool for Avid Elixir brakes.
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes
$13.00
Keep your brakes performing at their best with Avid's Assembly Grease. They're compatible with all Avid disc brake seals. You'll get a 1-ounce jar of grease.
$16.00
Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.
$64.00
Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2007-2010 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
$12.99
Adjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single-hole "lollipop" design, these tensioners reduce weight and help keep your rear wheel locked in place. Features: - New and Improved - 20mm of Adjustment - Single Axle Position - Slotted for Dropout - ED Black Hardware - Anodized Finish Specs: - Axle Size 10mm (3/8") only - Material 6061-T6 Aluminum - Hardware - Stainless Steel
$29.99
Box One Chain Tensioners are extruded then CNC-machined from 7075 aluminum for an optimal balance of strength and weight. A minimalist design adds style while reducing their overall mass. Laser-etched graphics include wheel position guides and two 10mm mounting holes with 15mm of adjustment to ensure perfect adjustability. Fits most frames every time you remove and replace your wheel. When used correctly, Box One tensioners will protect your frame dropouts and hold your rear wheel in place. Keep in mind. However, they aren’t indestructible (neither are your dropouts). Install these lightweight chain tensioners with care and leave the 15-inch breaker bar in your toolbox. Features: - New and Improved - 45mm of Adjustment - XO Skeleton Design - Dual-Sided Adjustment Grid - Dual-Color Adjustment Block Specs: - Axle Size: 10mm (3/8") only - Material: 7075-T6 Aluminum - Hardware: Stainless Steel
$12.95
- Freewheel remover for use with single speed 4-key freewheels - Can be used with a 24mm wrench - Compatibility: 4-Key
$30.49
- For use on 8-key single speed freewheels - Tool Type: Freewheel Remover - Compatibility: 16-22T smallest cog (Gray) - Compatibility: 13-14T smallest cog (Silver)
$5.00 - $18.99
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
$17.50 - $19.00
When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.
$49.99
Service kit for Cane Creek suspension forks.
$32.95
Compact Chain Tool
$16.00
- Professional wrenches fit internal nipples on many deep section aero rims
$17.50
- Slotted construction for securing Aerolite bladed spokes - Helps prevent spoke twisting while wheel building/truing - Red handle for 0.8-1.0mm spokes - Black handle for 1.0-1.3mm spokes
$17.60
Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs
$18.30
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - Multi-tool for DT aero spokes, torx, and square nipples
$27.60
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - Works with Torx-style nipples found on DT Swiss Tricon Wheels - This professional tool is designed for a precise fit and prevents rounding of nipples - Metal nipple interface contacts torx nipple on all surfaces
$34.00
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - This professional tool is designed for precise fit and prevents rounding of nipples - Metal nipple interface contacts nipple on all four surfaces - Fits 3.25mm square nipple interface
$36.50
Tools for working with DT Swiss spokes. - Punch with concave head - Improves seating of the spoke head in the hub flange
$39.30
Spoke Ruler
$54.00
Lefty Hub Adaptor for The DT Swiss Truing Stand.
$54.00
Guide tool for starting nipples in deep/aero rims.
$65.40
- All the tools you will need to disassemble and reassemble DT Swiss ratchet and 3 pawl hubs
$72.30
- All the tools you will need to disassemble and reassemble DT Swiss ratchet and 3 pawl hubs
$75.00
EXP Star Ratchet Disassembly Tool- Ratchet EXP Hubs
$77.30
Tools for working with DT Swiss spokes. - Special for stainless spokes
$81.80 - $99.90
Squorx nipple drivers for wheelbuilding and servicing DT wheels with Squorx nipples (Spline One).
$109.10
Developed for locking the nipple to the spoke during the wheel-building process, preventing the spoke-nipple connection from loosening. - Holds nipples in place but allows for up to 5 adjustments before compound breaks down - Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond - Developed in conjunction with Loctite - Includes two 10ml bottles
Page 1 of 40 Next page